Search

Page 1 of 2 (15 items) 1 2 Next >
  • Re: SRAM Red 22 BB30, Press Fit 30

    Yes you can, refer to my earlier post. Just dont forget the 15mm spacer as it does not come with the crankset.
    Posted to Forum (Forum) by korus1409 on 04-24-2018
  • Re: SRAM Red 22 BB30, Press Fit 30

    Just call the shop, talk to Joel and hell get you what you need...
    Posted to Forum (Forum) by korus1409 on 04-24-2018
  • Re: SRAM Red 22 BB30, Press Fit 30

    Revolution Bikes in California (just north of Lajolla). Joel is the owner and the one I ended up communicating with. REV124U is a discount code they use for online orders = 12%
    Posted to Forum (Forum) by korus1409 on 04-24-2018
  • Re: SRAM Red 22 BB30, Press Fit 30

    Well as it turns out I did in fact order the crankset that did in fact have the long spindle. This shouldnt be that difficult. Order the crankset, ensure that it has the long spindle, get the 15mm spacer and install it in your B.B. Right frame. Just did it a month or so ago on a 2018 R5 disc frameset that I built up with etap.
    Posted to Forum (Forum) by korus1409 on 04-24-2018
  • Re: SRAM Red 22 BB30, Press Fit 30

    I would post a pic of my R5 but cant figure it out. Get the longer spindle crank. It requires a 15mm spacer that you can get online of from your LBS as well as two washers that come with the crank and the wave washer. Again, SRAM has actual photos of the type Of spacers needed for every frame setup on their website (thats what I used ) Fits ...
    Posted to Forum (Forum) by korus1409 on 04-24-2018
  • Re: SRAM Red 22 BB30, Press Fit 30

    I just installed one on my 2018 R5. It does require adapters just check the SRAM service site for the needed adapters. Perfect fit btw...
    Posted to Forum (Forum) by korus1409 on 04-22-2018
  • S-2 Seatpost Clamp

    I overtightened the clamp a few days ago and stripped the threads. I've checked on-line but can't find a new one anywhere. Does anyone know if I can order directly from Cervelo? I also have an 06' aluminum Solist but I'm not sure if the clamp on that frame is compatible with the S-2 carbon. Thanks much! Chris
    Posted to Forum (Forum) by korus1409 on 10-16-2012
  • Fenders on a 2006 Soloist - what fits?

    Hey all, does anyone know of a fender set that will fit on the Solist?  After years of riding Tarmacs I moved over to Cervelo and have the Soloist as a rain bike.  I used "Crud" fenders on the Tarmac because they are the only ones that will fit the frame AND provide full coverage.  I mounted them on ...
    Posted to Forum (Forum) by korus1409 on 05-06-2012
  • Zipp 303/404 weights - Clincher vs Tubular

    So I have been in a quandry for a while in deciding between carbon tubular or clincher wheels. I had a set of Neuvation carbon tubulars a while back but only used them for races do to the hassle/cost of repairing a flat. I sold them and swore that I would never use tubular again because of that. I also never noticed the great ride tubulars are ...
    Posted to Forum (Forum) by korus1409 on 04-20-2012
  • Re: 2011 S2 (Ultegra) vs. 2012 S2 (SRAM/105)

    It's a great climber, better than my Tarmacs!
    Posted to Forum (Forum) by korus1409 on 04-04-2012
Page 1 of 2 (15 items) 1 2 Next >
Copyright © 2007-2013 Cervélo Cycles Inc. All rights reserved.