Page 1 of 15 (142 items) 1 2 3 4 5 Next > ... Last »
  • Re: Chain Ring Suggestions Needed

     I understand your concern, I had the felx-alot Rotor rings on both my R3 & S3.  Upgraded the R3 to full Ultegra 11 from 10 with a bottom bracket converter as it was an older bike. For the S3 got some Praxis Chain Rings. This all comes down to cold forging compared to CNC. Reading review I believe Dura Ace, Ultegra and Prixis are ...
    Posted to Forum (Forum) by spotter on 03-27-2018
  • Re: Creaking seatpost on 2016 S3

     Have you the saddle clamp? Maybe it's just some dirt around the rails.
    Posted to Forum (Forum) by spotter on 03-15-2018
  • Re: S3 or R3 with Di2?

     I have both frames and the real answer is it all comes down to the wheels and tyres! For my R3 I run solid heaver alloy wheels with 4Seasons as I use it to commute. Very stable and feels like its planted to the road. Not sure it I would like to go up a 8km mountain with this setup. For my S3 I run Zipp303 with 4000SII as its my weekend go ...
    Posted to Forum (Forum) by spotter on 02-21-2017
  • Re: Can you run conti Grand Prix 4000 II 28 inch wheels on a 2014-2015 r3?

     I believe you are asking if 28c tyres will fit. Unlikely while riding as I'll think it is the other way, in that 4000II run a little bigger than the stated size.
    Posted to Forum (Forum) by spotter on 10-26-2016
  • Re: Need help deciding which Cervelo S3

     I have a 2015 S3 with di2, at the time of ordering the dealer offered it a full RRP but with a full internal conversion. As the 2015 would be become very old stock for your dealer maybe put a be of presser on them to do this conversion as well, as it cleans up the look and you end up with the DA junction box.   I would also think ...
    Posted to Forum (Forum) by spotter on 10-19-2016
  • Re: What kinda of bike is this

     By the look of the seat stays with the slight curve I would say that it is a RS. This was the more entry model when Cervelo had the R3 and R3SL. Longer head tube and the frame was a little bit heaver. A lovely riding bike.
    Posted to Forum (Forum) by spotter on 09-18-2016
  • Re: bbright crank repl

    All fun aside, Im not convince that 52-36 works in the real world. Last year I upgraded my 2013 R3 to full Ultegra 6800 with 50-34 as I purchased a 2015 S3. After a year of riding I cant fault the shifting of the R3 with 6800 50-34. As for the S3 with Rotor 52-36 and 6850 Im not happy with the shifting at all. Noisy, unreliable going to the ...
    Posted to Forum (Forum) by spotter on 07-31-2016
  • Re: bbright crank repl

     I've got a set up "Flexomore Rings" which can be installed on the cranks to complete the look.
    Posted to Forum (Forum) by spotter on 07-26-2016
  • Re: Cervelo S3 upgrade query

     I can't run Conti GP4000S 11 25mm with my Zipp 303 on my 2015 S3 or my 2013 R3. The 303 and 4000S combo just makes the tyres really wide. So run 23mm and keep  in below 100psi and all is good. 
    Posted to Forum (Forum) by spotter on 02-11-2016
  • Re: Is my Cervelo r2 size defect?

     To hard to set a bike up over 20,000KMS away :) 1st thing you need to come to terms with is, will you like being more behind the bottom bracket. This will change how you weight will be over the two wheels. Easier to pop wheelies going up steep hills, different leg joint angles, steering will be more direct and less load on the front ...
    Posted to Forum (Forum) by spotter on 10-13-2015
Page 1 of 15 (142 items) 1 2 3 4 5 Next > ... Last »
Copyright © 2007-2013 Cervélo Cycles Inc. All rights reserved.